9
EN
Using the Lock
Once installed on door with the battery connected - your lock is ready for use.
Factory Default Setting
User & Master Codes are labeled on the inside trim plate and back cover page.
Entering User Codes
• Entering a correct, active user code (green LED x1 & beep x1) - unlocks
• Entering an incorrect or inactive code (red LED x2 & beep x2) - remains locked
• Three incorrect entries will result in lockout, signaled by 3 red LED flashes
& 3 short beeps, lockout lasts for 30 seconds.
To Restart Code Entry
Press and hold #1 button for three seconds (this works in entry or programming mode).
Key Access
Lock may also be unlocked and locked via keyed cylinder, each lock comes with two keys.
Passage & Privacy Mode
Use inside thumbturn.
Lever buttons
Keyed Cylinder
Thumbturn
Enable ON
Thumbturn
Enable OFF
Green
Amber
Lock access is regulated. A correct, active user code is required for
access. (Privacy Mode)
Lock access in NOT regulated. Always Unlocked (Passage Mode)
Thumbturn
Setting
Setting Description
Thumbturn Position LED Feedback
Your Lock is Ready to Use
How to Use
EN
Summary of Contents for EMTEK LISCIO
Page 43: ......
