13
EN
If You WishTo
Press Button
Actions
Add a code
# 1 and then # 3
Then enter new code and enter again to confirm (factory
setting is 4 digit mode)
Delete a code
# 4 and then # 3
Then enter code to delete and enter again to confirm
Change master code
# 3 and then # 3 again
Then enter new master code and enter again to confirm
Turn ON Deny Users
# 4 and then # 1
Turn OFF Deny Users
# 5 and then # 1
(factory setting is OFF)
Deny Users can disable or enable all user codes – when ON, no user codes will work, only key operates lock
Delete all codes
# 5 and then # 5 again
Set 4 digit code length
# 5 and then # 2
(factory setting is 4 digits)
Set 6 digit code length
# 5 and then # 3
Turn Beeper ON
# 1 and then # 1 again
(factory setting is ON)
Turn Beeper OFF
# 1 and then # 2
Turn Extended timeout OFF
# 2 and then # 1
(factory setting is OFF)
Turn Extended timeout ON
# 2 and then # 2 again
Extended timeout mode allows for a longer duration of unlock time upon entry of a valid user code.
Turn Passage switch OFF
# 3 and then # 1
Turn Passage switch ON
# 3 and then # 2
(factory setting is ON)
Passage switch mode ON, choose between Passage (lock unsecured) and Privacy
(always locked) and OFF lock is always in Privacy (always locked).
Restore Factory Defaults
enter # 1 and then # 4
enter master code to confirm
The lock can be programmed manually using the keypad buttons 1 through 5. This feature is made available but
programming using a smart phone is highly recommended.
Manual Programming Commands
To enter programming mode – press the #1 and the #5 buttons simultaneously
Enter the lock’s 6 digit master code (the master code will be on sticker on back cover page and inside trim plate of lock)
The features below now accessible by entering a combination of two buttons one after the other (not simultaneously)
Manual Programming
1
2
3
EN
EN
Summary of Contents for EMTEK LISCIO
Page 43: ......
