9
ED7800 Series
Installation Instructions
Concealed Vertical Rod Exit Devices
FM466 04/20
Copyright © 2018, 2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
From Outside: When door is opened by turning operator latch, top latch and bottom bolt should
retract and stay retracted until plunger screw is pushed in.
From Inside: When door is opened by depressing crossbar, top latch and bottom bolts should retract,
and stay retracted until plunger screw is pushed in.
Lock crossbar in dogged down position. Latch and bolt should be fully retracted.
NOTE: No dogging feature on “U” series.
13
Test Operation
When door is closed against top strike,
plunger screw releases top latch and
bottom bolt. Adjust so that when door is
shut tight, screw head just touches strike.
(Figure 20)
12
Adjust Plunger Screw
Just Touch
Figure 20
