ED5800 (A) Series
Installation Instructions
Concealed Vertical Rod Exit Devices
FM171 01/19
Copyright © 2012, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
8
X
Y
Centerline
Device Mounting
Holes, Rods
& Strikes
Shim
(2 supplied)
(Start with one)
Strike Plate
(Ridges face down)
Strike
(2) 10-24 x 3/4" PFHMS
Note: Third screw must
be installed after device
is adjusted and works
properly.
11
Install Strikes
Strike
(Press in place)
Note: Bottom Bolt will
retract to 1/8" (3mm)
above Floor Strike.
Floor covering in door
path must be laid out
accordingly.
Figure 18
Detail Y
Bottom Strike
Figure 19
Figure 20
Detail X
Upper Strike