FM566 05/21
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected] • www.corbinrusswin.com
Copyright © 2021, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved.
Reproduction in whole or in part without the express written permission of ASSA ABLOY Access
and Egress Hardware Group, Inc. is prohibited.
WARNING
This product can expose you to lead
which is known to the state of California
to cause cancer and birth defects or other
reproductive harm. For more information go
to www.P65warnings.ca.gov.
CLX3300
Installation Instructions
Cylindrical Lockset
12
Miscellaneous Options
e
CLX3329 Hotel Function Adjustment
1. Remove lever, cylinder, and spacer from outside trim. The button on the inside trim should be in the unlocked position.
2. Insert adjustment tool (provided with lock) into interior cap as shown below.
3. Rotate cap clockwise until fully tight.
4. Rotate back counter-clockwise until tool handle is approximately in line with the end of the shank (as shown) AND cap slot
orientation is vertical. Slot alignment may require a slight rotation in either direction.
5. Remove adjustment tool and re-install spacer, cylinder, and lever. Lever install will require key be rotated 90°
counter-clockwise.
- To adjust timing of hotel cylinder key lockout indicator
cap
6. Test to confirm that both the operating and the emergency key work properly in both the unlocked and locked (pushed
and turned on button) positions.
- If the operating key is still working in the locked position, adjust cap a half of a turn CCW and retest.
- If the emergency key is not working properly in the locked position, adjust cap a half of a turn CW and retest.
