ML20700 PWI/PIP Series Mortise Lock
20
Copyright © 2015 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
Cable: CAT 5e or higher
24 AWG
JST
4-Pin
Molex-F
Molex-F Molex-M
Cable
: CAT 5e,
26 AWG stranded,
shielded, 100ohm
TIA/EIA-568-B Standard Wiring
RJ45-M
Molex-M
RJ45-F Jack
Cable
: CA
T 5e or higher
24 A
WG shielded, 100ohm
Approved Software
B-Splice
Crimp Connector
Certified Integrator (CI) supplies and terminates
the B-Splice connector and the
Male RJ45 connector from harness to
end user provided facility cable
Supplied by End User
PoE Switch
PoE
Lock
Ceiling
Supplied by CI
C
B
A
PoE Patch Panel
Drain Wire Terminated on Rack
D
Ground
Ring Terminal
Secured to Lock
Mounting Plate
PoE Switch
Rack is
Terminated to
Earth Ground
Patch Cable:
PoE Panel to
PoE Switch
4-Pin
Molex
A. PoE Frame harness assembly
(From McKinney)
B. PoE data hinge (Patent Pending)
(From McKinney)
C. PoE Door harness*
(From McKinney)
D. Access 700 PIP (PoE Lock)
* Order of installation may vary.
Refer to appropriate sections for instructions.
Frame-Side
Harness
Assembly
(15' length)
24AWG
Stranded
Drain
Wire for
Earth
Ground in
15' Frame
Harness
Cable drain
wire con-
cealed in
shrink tubing
6) PIP (PoE) Installation Wiring
17. PIP (PoE) Installation Wiring:
A
B
C
D
To building or electrical ground
Summary of Contents for Corbin Russwin Access 700 ML20700 PIP Series
Page 2: ......
