ML20700 PWI/PIP Series Mortise Lock
16
Copyright © 2015 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
Lock
Body
(10-pin)
9-24VDC
Power*
Reader
(24-pin)
Fig. 11a
Board-to-Board
Connector
CAUTION - Do not touch or allow debris to enter connector contacts.
*NOTE: Optional 2-pin external 9-24VDC power connector.
Secure the following connectors to their respective terminals (Fig. 11a, b):
A. Secure the 10-pin lock body assembly connector.
Fig. 11b
Wire Positioning:
Please follow these steps prior to installing
inside escutcheon to prevent any damage
caused by pinching wires:
11. Installation of Connectors
D
A
B. Tuck excess cable into wire holes on inside of door
(Fig. 11c).
C. Finish securing mounting plate and reader to door by
fully tightening through-bolts on inside of door.
D. Secure the 24-pin card reader connector (Fig. 11c).
*F
or more detail,
refer to section (5) ‘
Installation Wiring
’,
“A - Frame Harness Installation”.
B
Fig. 11c
Tuck excess
cable here
Summary of Contents for Corbin Russwin Access 700 ML20700 PIP Series
Page 2: ......
