ML20700 PWI/PIP Series Mortise Lock
10
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5) Installation Instructions (Continued)
Inside Face of Door
Step 4A
Step 5 -
Align adjustment bolt with threaded hole in lever
Adjustment bolt needs
to be threaded in farther.
Adjustment bolt needs
to be unthreaded.
Adjustment bolt
fully aligned.
Notes:
•
Unthread Adjustment Bolt approximately four turns
for a good starting point (After being fully tightened)
•
Make sure O/S lever is fully inserted into adapter
plate before aligning adjustment bolt.
Step 6
STANDARD
MUSÉO
Use Correct Spindle Orientation
Good Bad
Lever
5.
Install Standard Lever Trim Instructions (continued):
Step 4B
Inside Face of Door
