ML20700 PWI/PIP Series Mortise Lock
25
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
2. Installation of Connectors
7) PWI (Wireless) Wiring & Installation (Continued)
b. Tuck excess cable into wire hole on inside of door.
c. Finish securing mounting plate and reader to door by fully tightening through-bolts on
inside of door.
d. Secure the 24-pin card reader connector.
CAUTION - Do not touch or allow debris to enter connector contacts.
*NOTE: Optional 2-pin external 9-24VDC power connector (PWI1- Wireless only).
Secure the following connectors to their respective terminals (Fig. 11a, b):
a. Secure the 10-pin lock body assembly connector.
Wire Positioning:
Please follow these steps prior to installing
inside escutcheon to prevent any damage
caused by pinching wires:
Fig. 11b
Mounting Plate
D
A
Lock body
cable
Lock
Body
(10-pin)
DPS
(4-pin)
Reader
(24-pin)
9-24VDC
Power*
Fig. 11a
Board-to-Board
Connector
*Opt.
Hard
Power
(2-pin)