English
59
Z690 PG Riptide
Chapter 4 UEFI SETUP UTILITY
4.1 Introduction
This section explains how to use the UEFI SETUP UTILITY to configure your
system. You may run the UEFI SETUP UTILITY by pressing <F2> or <Del> right
after you power on the computer, otherwise, the Power-On-Self-Test (POST) will
continue with its test routines. If you wish to enter the UEFI SETUP UTILITY after
POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the
reset button on the system chassis. You may also restart by turning the system off
and then back on.
Because the UEFI software is constantly being updated, the following UEFI setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.
Summary of Contents for Z690 PG Riptide
Page 1: ......
Page 21: ...English 14 5 7 6 4...
Page 23: ...English 16 2 2 Installing the CPU Fan and Heatsink 1 2 C P U _ F A N...
Page 25: ...English 18 1 2 3...
