ASROCK Z690 PG Riptide, User Manual

Page: 85 / 113

English
78
Offset Prefix
Sets the offset value as positive or negative.
Uncore Voltage Mode
Selects between adaptive and Override Voltage modes. In Override Mode the volt-
age selected will be applied over all operating frequencies. In Adaptive Mode the
voltage is interpolated only in turbo mode. Uses Mailbox 0SR 0x150, cmd 0x10,
0x11.
Uncore Extra Turbo Voltage
Specifies the extra turbo voltage applied while SA Uncore is operating in turbo
mode. Uses Mailbox MSR 0x150, cmd 0x10, 0x11. Range 0-2000 mV.
Uncore Voltage Offset
Specifies the Offset Voltage applied to the Uncore domain. This voltage is specified
in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV.
Offset Prefix
Sets the offset value as positive or negative.
Save User Default
Type a profile name and press enter to save your settings as user default.
Load User Default
Load previously saved user defaults.
Save User UEFI Setup Profile to Disk
It helps you to save current UEFI settings as an user profile to disk.
Load User UEFI Setup Profile from Disk
You can load previous saved profile from the disk.