ASROCK K8UPGRADE-VM -, Installation Manual

Page: 13 / 128

1 3 1 3 1 3 1 3 1 3
ASRock K8Upgrade-VM800 Motherboard
Serial ATA (SATA) Please connect the black end of
Power Cable SATA power cable to the power
(Optional)
connector on each drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
USB 2.0 Header ASRock I/O Plus TM provides you
(9-pin USB67)
6 ready-to-use USB 2.0 ports on
(see p.2, No. 21)
the rear panel. If the rear USB
ports are not sufficient, this
USB 2.0 header is available to
support 2 extra USB 2.0 ports.
Shared USB 2.0 Header This USB45 header is shared
(9-pin USB45)
with the USB 2.0 ports 4,5 on
(see p.2, No. 33)
ASRock I/O Plus
TM
. When using
the front panel USB ports by
attaching the front panel USB
cable to this header (USB45), the
USB ports 4,5 on ASRock I/O
Plus TM will not be able to function.
Infrared Module Header This header supports an
(5-pin IR1)
optional wireless transmitting and
(see p.2, No. 9)
receiving infrared module.
Internal Audio Connectors These connectors allow you to
(4-pin CD1, 4-pin AUX1)
receive stereo audio input from
(CD1: see p.2, No. 32)
sound sources such as a CD-
(AUX1: see p.2, No. 31)
ROM, DVD-ROM, TV tuner card,
or MPEG card.
Front Panel Audio Header This is an interface for front panel
(9-pin AUDIO1)
audio cable that allows conve-
(see p.2, No. 29)
nient connection and control of
audio devices.
CD1
AUX1
connect to the
power supply
connect to the SATA
HDD power connector
EnglishEnglishEnglishEnglishEnglish