ASROCK AC2600 G10 User Manual Download Page 45

Page: 45 / 59

English

ASRock G10 Gaming Router

6.8.6 Restore / Save

The configuration settings of the router are stored within the router in a
configuration file. You can export this file to your computer, restore it, or reset it to
the factory default settings.

Restore to Factory Default Setting

You can erase the current configuration and restore the default settings.

Select

Advanced > Administration > Restore/Save

Press the

Restore

button.

The factory default settings are restored. The user name is "admin", the password is
"admin", and the LAN IP address is 192.168.1.1.

You can also press and hold the "Reset" button for more than 10 seconds on the rear
of the router to restore the default settings.

LED Indicator Variations:

Exporting Router Configurations

Select

Advanced > Administration > Restore/Save

Press the

Export

button.

A copy of the current setting is saved in the location you specified.

Importing Router Configuration

Select

Advanced > Administration > Restore/Save

Press the

Select Files

button.

Ready

Shutdown

Press Reset for

more than 10 sec

Reset

Restoring the

default settings

Summary of Contents for AC2600 G10




























































Search results

Summary of Contents for AC2600 G10

Reviews:

Related manuals for AC2600 G10

Brands by name

Popular brands

ASROCK AC2600 G10, User Manual

Search results

Summary of Contents for AC2600 G10

Reviews:

Related manuals for AC2600 G10

Brands by name

Popular brands