manualshive.com logo in svg

ASROCK AC2600 G10, User Manual, Page: 34 / 59

Share
Download
ASROCK AC2600 G10 User Manual Download Page 34

26

27

English

ASRock G10 Gaming Router

6.3 WAN Settings

You can view or configure Wide Area Network (WAN) settings for the internet port. You 
can set up a demilitarized zone (DMZ) server, change the maximum transmit unit (MTU) 
size, and so on.

6.3.1  Internet

• 

Connection Type: Choose your internet service provider type. Options include: 
Dynamic IP, PPPoE, PPPoA, L2TP, and PPTP.

• 

WAN IP: By default, the IP address is acquired from your ISP automatically.

• 

WAN DNS: By default, the DNS address is acquired from your ISP automatically.

• 

MTU Value: The Maximum Transmit Unit (MTU) defines the largest size of packets 
that an interface can transmit without the need to fragment. Change the MTU value 
only when it is necessary for your ISP connection.

• 

MAC Clone: The Router can use a MAC (Media Access Control) address that you 
define as its own. This is often used when an internet provider only authorizes one 
MAC address to access the internet. 

Press "Apply" to save the settings and reboot the router.

Summary of Contents for AC2600 G10




























































Reviews:

No comments