27
26
www.comfimotion.com.au
ComfiMotion is a registered trademark.
Connect the Electrical Cable
6
to port 4 of the control box of the LEFT bed.
Do
NOT
connect the other end of this cable to the junction box yet.
To interlink the two beds together, first slightly lower the RIGHT bed and then position beds side by side.
Ensure head ends of the bed are in-line. Once in position, slowly raise the RIGHT bed to the match the LEFT
bed height, ensuring the hooks from each bed slide into each other and interlink. Ensure both head and
foot ends are interlinked.
8
9
Gently push on beds to ensure they are interlinked and move side-to-side together.
Connect the Electrical Cable from RIGHT bed to the 2nd port of the junction box on LEFT bed.
Test beds are connected by pressing hi-lo button from one handset. Both beds should move together.
To complete set up, run a Factory Reset
(See Section 6 - Handset Operation) from one of the handsets
during which time the beds will lower to minimum height and control boxes will synchronise the two
systems.
The beds should now raise and lower simultaneously.
Secure Electrical Cable
6
to LEFT bed using zip-ties if needed.
10
11
12
14
13
Summary of Contents for CombiMotion ACTIV CARE
Page 1: ...USER MANUAL ACTIV CARE ...
