17
16
www.comfimotion.com.au
ComfiMotion is a registered trademark.
Using a box cutter, unhook all components from the base of the bed (retainers, power cord, hand control and
castors).
LONG SINGLE BEB046740
KING SINGLE BEB046750
Remove bed from carton and position on flat surface or a Bed Moving Trolley for easy setup. Ensure the bed
is placed TOP DOWN, so all components (hand control, retainers, castors & power cord) can be removed
easily from the underside of bed.
1
2
HOW TO UNPACK & INSTALL
8.1 BEDS
DO NOT USE a box cutter, stanley knife or sharp
implement when opening the carton.
Doing so may cause irreversible damage to the
product and void warranty.
Cut safety securing straps that hold the bed in place when in carton.
Turn bed FACE UP, secure 4 x mattress retainers (side) and 1 x mattress retainer (foot) in place by pushing
into allocated slots.
Finally, place the mattress onto the bed ensuring all mattress retainers hug the sides and
footend.
Conduct a Factory Reset to ensure control box and actuators are correctly synchronised before first use.
To conduct a factory reset:
Press
Night Assist
button for 5 seconds until battery/LED indicator light starts flashing. While battery
indicator light flashes, simultaneously press
Zero Gravity
and
legrest up
buttons until mattress
deck goes to flat position, bed lowers to minimum height and battery/LED indicator flashes three times.
4
5
6
Connect hand control into control box port.
3
Side Mattress Retainer
Foot End Retainer
Summary of Contents for CombiMotion ACTIV CARE
Page 1: ...USER MANUAL ACTIV CARE ...
