2
UVR-HE Series
1. INTRODUCTION
• Always make sure there is easy access for component maintenance.
• The product’s installation and maintenance must be carried out by qualified technicians. In case of failure or malfunction, always
contact authorised service personnel.
• In case of appliance transfer or removal, always contact authorised personnel.
• Do not expose the recovery unit to water jets.
• Do not start the recovery unit without the inspection door.
• Check the installation conditions for any damage.
• The contaminants retained by the filters can have harmful health effects in case of contact with the skin.
• Precautionary measures are necessary when handling dirty filters. The use of protective gloves and face shield are recommended
during cleaning.
• Make sure the appliance is earthed before commissioning. This is essential for correct and safe operation.
• This appliance has been thoroughly tested at our plant and warranted for the period indicated on the warranty certificate.
• For optimal use of the equipment you have purchased, please read this instruction manual carefully where you will find fundamental
information about the product’s features, its correct use and maintenance.
THANK YOU FOR PURCHASING OUR APPLIANCE. BEFORE USING IT, READ THE USER MANUAL CAREFULLY AND STORE IT
PROPERLY FOR FUTURE REFERENCE
The products illustrated in this manual may differ from the actual product, depending on the various models. The equipment must not
be used by persons (including children) with reduced mental, sensory or physical abilities, ie persons without experience or knowledge,
unless they have been trained to use the equipment by a person responsible for their safety. In particular, it is necessary to prevent
children from using the equipment.
• Installation must be carried out by specialised personnel.
• When installing, use suitable, accident-prevention clothing, such as: goggles, gloves, etc., as indicated by 686/89/EEC as amended.
• During installation, operate in total safety, clean environment and free from obstructions.
• Comply with the laws in force in the country where the machine is installed, regarding the use and disposal of the packaging and of
the products used for machine cleaning and maintenance, and observe the recommendations of the manufacturer of these products.
• Before starting the unit, check that the various components and
• the entire system are intact.
• Do not touch moving parts or intervene between them.
• Do not perform cleaning and maintenance unless the power line has been disconnected.
• Maintenance and the replacement of damaged or worn parts must only be carried out by specialised personnel and following the
instructions given in this manual.
• Spare parts must correspond to the needs defined by the Manufacturer.
• In case of dismantling the units, follow the anti-pollution regulations provided.
• The installer and user of the unit must take into account and remedy
• ALL other types of risks associated with the system, such as risks deriving from the entry of foreign bodies and risks due to the
conveyance of hazardous gases that are flammable or toxic at high temperature.
IT IS FORBIDDEN TO START THE UNIT IF THE FAN OPENINGS ARE NOT DUCTED OR PROTECTED WITH AN ACCIDENT-PREVENTION NET
ACCORDING TO UNI 9219 AS AMENDED.
