3
Routine Maintenance
30
STERRAD
®
Sterilization System Routine Maintenance Guide
Figure 9.
Make sure the plate is correctly placed before using the sterilizer.
Replacing the Printer Ribbon Rolls or Cartridge
To replace the
printer ribbon rolls,
do the following:
1. Open the printer drawer on the control panel.
Figure 10. Opening the printer drawer.
2. Hold back the left and right security clips and pull carefully to
remove the old ribbon rolls. Discard.
Figure 11. Holding back the security clip to
remove the old ribbon roll.
3. Remove the new ribbon rolls from the packaging. Unroll the ribbon
about 150 mm (6 inches). Hold back the left security clips and insert
the ribbon into the printer slot (red half inside.)
