ASP SlimScan BT, Full Manual

Page: 13 / 43

SlimScan BT Full Manual 9
Scanner beeps
The scanner emits various beeper sounds to signal its operating status.
The table below details these beeper sounds.
Beep Sound Indication
Single beep
Good decode, and data is either transferred to the PC or
saved in the memory.
2 short high beeps Low battery warning.
3 short low beeps The flash memory is full.
2 long high beeps
The scanner has completed data transfer in either
Standard Batch Mode or Cradle Contact Batch Mode .
4 short high beeps
An error has occurred – for example, the scanner can’t
send the data to the PC, or the pairing is lost, etc.
Low to high beeps A Bluetooth connection has been made.
Short high-low-high
beeps
Start pairing
Short medium and
long low beeps
Powering off
Cradle indicator
The cradle base contains a large indicator on the base. The colour of
this indicator, and whether it’s flashing or constantly lit, indicates these
conditions:
LED state Indication
LED flashes BLUE The cradle is waiting to pair.
LED constantly BLUE The cradle is paired with the scanner.
LED alternately flashes
BLUE and RED Initialisation of the cradle failed. Turn off the power,
wait a few seconds, then turn it on again.
LED flashes RED once The cradle has received data from the paired scanner.
LED constantly RED The cradle is in the process of pairing.