ASL INTERCOM VAR12 Operation Manual Download Page 50

Page: 50 / 308

VAR4 / VAR12 / VAR20 - Operation Manual

sue: 03 complete, approved

Page 50 of 308

5.10 Configuration

Data

5.10 Configuration

Data

Note that the configuration data functions are not available on the Configuration Tool.

5.10.1

Configuration Data View

5.10.1

Configuration Data View

The user can view the last configuration actions, as described in the following steps.

The user needs to be logged on as User 2 to be able to view the configuration data.

1. Select

Configuration

System

Access

Config Log

View config

2. Scroll through the records:

[LAST CLEAR – 15Feb2006 10:11 DOWNLOAD]

Default value:

Last saved event.

3. Press the SELECT or BACK key to return to the parent menu.

5.10.2

Clearing Configuration Data and Restoring to Default Settings

The user can clear all configuration data stored in the VAR Router, as described in the following steps. All
default settings are restored, see

Table 23

•

The system will become inoperable after clearing the configuration data, and will need to
be re-configured before further use.

•

It is recommend that the current configuration be loaded and saved to a file using the
Configuration Tool before clearing the configuration data, see Section
“

19 PC Configuration Tool

”.

1. Select

Configuration

System

Access

Config Log

Clear config

Default value:

n.a.

2. A confirmation message is displayed:

Press SELECT to confirm clear config

3. Press the SELECT key to proceed, or cancel by pressing the BACK key.

4. A second confirmation message is displayed:

WARNING - SYSTEM WILL BECOME INOPERABLE

Press SELECT to confirm clear config

5. The user is requested to re-enter the access code to confirm the operation.

6. After clearing the configuration data the user is requested to power cycle the system.

Summary of Contents for VAR12





















































































































































































































































































































Search results

Summary of Contents for VAR12

Reviews:

Related manuals for VAR12

Brands by name

Popular brands

ASL INTERCOM VAR12, Operation Manual

Search results

Summary of Contents for VAR12

Reviews:

Related manuals for VAR12

Brands by name

Popular brands