manualshive.com logo in svg

ASL INTERCOM VAR12, Operation Manual

The ASL INTERCOM VAR12 Operation Manual is now available for free download on our website. This comprehensive manual provides detailed instructions and guidelines for operating and optimizing your VAR12 product. Access the manual today at manualshive.com to unlock the full potential of your ASL INTERCOM VAR12.

Share
Download
background image

VAR4 / VAR12 / VAR20 - Operation Manual 

 

Is

Page 305 of 308 

sue: 03 complete, approved 

26 Index 

A

 

access code............................................12, 21, 22 
amplifier 

change-back..................................................268 
changeover ...................................................268 
measurements ..............................................274 
spurs ...............................................................66 

amplifier frames 

commissioning ................................................53 
detect ..............................................................52 

ans 

attack time.....................................................170 
current reading ..............................................264 
operation .......................................................171 
range .............................................................170 
threshold .......................................................170 

B

 

background music.......................................79, 150 
backlight..............................................................12 
bargraph ...........................................................263 
bmb01 digital output .........................................256 
bs5839 ....................................... 70, 203, 245, 

293

 

C

 

communications parameters ..............................43 
configuration 

checklist ..........................................................19 
save.................................................................20 

configuration tool ......................................280, 281 

D

 

defaults 

manual restore ........................................12, 298 
restore via sw ..................................................50 

display.................................................................10 

automatic update.......................................63, 66 
automatic updates...........................................63 
timeouts...........................................................12 
top level...........................................................14 

dva 

play mode..................................... 127, 209, 251 
priority ...........................................................141 

dva routing ........................................................105 

bmb01 contact.............................. 238, 243, 245 
busy indication ............................. 125, 207, 249 
button ............................................................112 
contact.......................................... 199, 201, 203 
latched.. 112, 120, 193, 196, 203, 236, 238, 245 
non-latched . 112, 118, 193, 196, 201, 236, 238, 

243 

play once.......................................................123 
route ..............................................................115 

E

 

eeprom............................................................... 20 
equaliser 

3-band .................................................... 77, 149 

external alarm input 

bmb01 contact.............................................. 254 

external fault input 

bmb01 analogue input.................................. 231 
contact.......................................................... 212 

F

 

fault 

accept........................................................... 283 
accept&clear................................................. 282 
access level.................................................. 301 
clear.............................................................. 301 
clear.............................................................. 283 

frame 

dip switch...................................................... 269 
measurements.............................................. 269 

G

 

global mute ........................................ 89, 142, 154 

H

 

high pass filter.................................................... 77 
host system........................................................ 46 

I

 

induction loop................................................... 180 

K

 

key.......................................................... 11, 14, 15 

audio mon

........................................ 11, 262, 263 

fault accept

....................................... 11, 282, 283 

fault clear

................................................. 11, 283 

lamp test

.................................................. 11, 262 

L

 

led ...................................................................... 10 

busy...................................................... 155, 160 

listen-in function ............................................... 102 
lithium battery............................................. 42, 302 
log book ..................................................... 18, 

293

 

M

 

menu 

markers .......................................................... 14 

microphones 

all-call button ........................................ 105, 130 
fire .................................................................. 98 
paging............................................................. 98 
priority............................................................. 88 
security key .................................................. 133 
single button ................................................. 135 

Summary of Contents for VAR12





















































































































































































































































































































Reviews:

No comments

Related manuals for VAR12

Ubiquiti M900 Quick Start Manual preview
M900
Brand: Ubiquiti Pages: 24
Patton electronics ipRocketLink 3086FR Quick Start Manual preview
ipRocketLink 3086FR
Brand: Patton electronics Pages: 12
i-MO OptiBond 210 C Series Hardware Installation Manual preview
OptiBond 210 C Series
Brand: i-MO Pages: 16
RR-Concepts StationMaster Manual preview
StationMaster
Brand: RR-Concepts Pages: 12
Watchguard Firebox T20 Hardware Manual preview
Firebox T20
Brand: Watchguard Pages: 21
Lanner ECA-4027 User Manual preview
ECA-4027
Brand: Lanner Pages: 99
WIN Enterprises PL-83300 User Manual preview
PL-83300
Brand: WIN Enterprises Pages: 25
Comtrend Corporation AR-5319 User Manual preview
AR-5319
Brand: Comtrend Corporation Pages: 208
Dynamix DV-24 User Manual preview
DV-24
Brand: Dynamix Pages: 87
Allynk Technology CAG-0100 User Manual preview
CAG-0100
Brand: Allynk Technology Pages: 39
ZyXEL Communications ES-105 User Manual preview
ES-105
Brand: ZyXEL Communications Pages: 12
Ubiquiti EdgeRouter X ER-X-SFP Quick Start Manual preview
EdgeRouter X ER-X-SFP
Brand: Ubiquiti Pages: 20
Hameg HM6050-2K Manual preview
HM6050-2K
Brand: Hameg Pages: 46
TheGreenBow IPSec VPN Client Zyxel ZyWall 10 Configuration Manual preview
IPSec VPN Client Zyxel ZyWall 10
Brand: TheGreenBow Pages: 12
ICP DAS USA ZT-2005-C8 User Manual preview
ZT-2005-C8
Brand: ICP DAS USA Pages: 60
Aetina Nvidia Jetson Series Quick Start Manual preview
Nvidia Jetson Series
Brand: Aetina Pages: 7
Aetina AIE-KX13 User Manual preview
AIE-KX13
Brand: Aetina Pages: 22
Crestron HZA-PWR-15A Quick Start preview
HZA-PWR-15A
Brand: Crestron Pages: 2

Brands by name

Popular brands

Load more brands