ASL INTERCOM VAR12 Operation Manual Download Page 134

Page: 134 / 308

VAR4 / VAR12 / VAR20 - Operation Manual

sue: 03 complete, approved

oved

Page 134 of 308

9. Move to, and toggle to the required protection mode in the left field:

[Mode=Not Protected] Switch #--

•

[Mode=Not Protected]

•

[Mode=Not Protected]

The button is not protected by a key-switch.

•

[Mode= Protected]

•

[Mode= Protected]

The button is protected by a key-switch.

When this mode is selected, the switch list is scrollable for selection. Continue on the next step.

Default value:

‘Mode=Not Protected’

Default value:

‘Mode=Not Protected’

10. If ‘Protected’, move to, and scroll the switch list until the required key-switch is displayed in the right

field:

10. If ‘Protected’, move to, and scroll the switch list until the required key-switch is displayed in the right

field:

Mode= Protected [Switch # 1]

Default value:

‘Switch # 1’

Default value:

‘Switch # 1’

Switch:

1 to 9

Switch:

1 to 9

Note:

One key-switch may be configured to protect more than one button.

Note:

One key-switch may be configured to protect more than one button.

11. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key.

Reference to Configuration Tool

7.3.4.5

Summary of Contents for VAR12





















































































































































































































































































































Search results

Summary of Contents for VAR12

Reviews:

Related manuals for VAR12

Brands by name

Popular brands

ASL INTERCOM VAR12, Operation Manual

Search results

Summary of Contents for VAR12

Reviews:

Related manuals for VAR12

Brands by name

Popular brands