Asko WM25, Service Manual

Page: 7 / 16

Service manual WM25
7
Variant settings
The following version settings can be made after replacing the control unit for WM25:
Total reset
1. Hold the start/stop button (S1) in when you switch on the main power switch until an LED on the panel
lights.
Number of rinses
1. Hold both the start/stop button (S1) and door open button (S2) pressed in when you switch on the
main power switch until L7 – L16 flash.
2. Change the number of rinses by pressing the door open button (S2) repeatedly.
L1 – L3 light for three rinses. L1 – L5 light for 5 rinses.
3. Confirm your selection by pressing the start/stop button (S1).
Automatic door opening
1. Hold the door open button (S2) pressed in when you switch on the main power switch until L7 – L16
flash.
2. Change the setting by pressing the door open button (S2). L3 and L4 light when automatic door open-
ing is selected.
3. Confirm your selection by pressing the start/stop button (S1).
Super rinse or Delayed Start
1. Hold S5 or S6 pressed in when you switch on the main power switch until L7 – L16 flash.
2. Change the setting by pressing S5 or S6. All LEDs L19 – L30 light for delayed start.
3. Confirm your selection by pressing the start/stop button (S1).
Temperature/Spin speed or Stain/Super rinse
1. Hold S4 pressed in when you switch on the main power switch until L7 – L16 flash.
2. Change the setting by pressing S4. All LEDs L19 – L30 light for delayed start.
3. Confirm your selection by pressing the start/stop button (S1).
The control unit detects and adjusts automatically to the panel layout and machine model when button S4
or S5 is pressed several times.
L34
L1
L2
L3
L6
L4
L5
S8 S11 S6 J1 S10
S1
S2
S7
L13
L12 L11
L14
L15
L16
L10
L8
L7
L9
L23
L22 L21
L31
L32 L33
L24
L30
L29
L20
L25
L26
L27 L28
L19
S9 S4 S5
Main power switch
S = Push button
L = LED