Asko WM25, Service Manual

Page: 6 / 16

Service manual WM25
6
Options and settings
Options
Increases the temperature and extends the time of the main wash
This option is only available on the American market.
White:
140°F / 170°F + approx 40 min
Colours: 105°F / 120°F + approximately 40 min
Permanent
press: 105°F / 120°F + approximately 15 min
Gives 2 – 4 extra rinses
This option cannot be selected with Wool/Hand wash, Rinse programme, Spin or Drain.
Delays the start of the machine by 5 hours
Activated by pressing the “Delayed start” button
and then the start/stop button
The number 5 in the display indicates that Time-delayed start has been activated. The number of
hours to start is displayed with a countdown from 5 to 1.
Produces extra water in the main wash and rinses
Cannot be selected for wool/ hand wash, spinning and draining
Settings
400 400 800 800
1000 1000
1400 1400
It is possible to select spin speed between 400 and 1400 rpm, ”No spin” and ”No draining” (option
depending on machine type).
Spin at 400 – 800 rpm means a short spin.
For certain programmes, it is not possible to select a speed in excess of 800 rpm (see the table).
“No spin” means that the programme does not include a spin cycle and ends by draining.
“No draining” means that the programme does not include a spin cycle and ends with the water
from the final rinse still in the machine.
Cold
30
40 50
60
95
Possible to select temperatures between ”Cold” and 95°C.
With ”Cold” selected, the water in the machine is not heated.
Programme number 7 does not allow a temperature above 40°C to be selected.
Indication of programme sequence
During the programme, the current programme sequence is indicated by a fixed light in the LEDs around the start/stop/door
open button (see the image).
Start End
Final rinse
Heating up
Rinsing and spinning Temperature reached