Asko WL6511XXLT, Service Manual

Page: 42 / 74

43
3) H5 Error - Water temperature error in wool/ delicate course
①
In case water temperature in wool/ delicate course is
113°F (
45
℃
)
or higher
②
An e
rror buzzer alarm is sounded for 10 seconds every 10 minutes.
③
The er
ror display is cleared when turning off/ on power.
4) H6 Error - Abnormality in washing heater
①
Within 15 minutes after heater operation begins;
In case standard temperature is of
108°F (
42
℃
)
or lower: If temperature does not increase by 2
°F
or more
.
In
case standard temperature is higher than
108°F (
42
℃
)
: If temperature does not increase by
2°F
or more
②
If temperature falls below standard temperature by 2
°F
or more due to re-supply of water, etc.,
standard temperature is reset as the current temperature and error check time of 15 minutes is reset.
③
An e
rror buzzer alarm is sounded for 10 seconds every 10 minutes.
④
The e
rror display is cleared when turning off/ on power.
5) H8 Error - Washing heater overheating
①
In case washing heater temperature increases by
10°F (
5
°C)
or more within 30 seconds when there is no
water in tank, etc.
②
An e
rror buzzer alarm is sounded for 10 seconds every 10 minutes.
③
The e
rror display is cleared when turning off/ on power.
6-11. PFE (Pump Filter Error)
①
Cycle is skipped to the next when the current r.p.m. is different from the target r.p.m by 70 during
the
middle
spin
cycle
.
②
Cycle is ski
pp
ed to balance spin when the current r.p.m is different from the target r.p.m by 70
during main spin
cycle
.
③
'PFE' error is caused if main spin
cycle
current r.p.m differs from the
target r.p.m by by 70
occurs 10 times.
④
The e
rror display is cleared when turning off/ on power.