Asko WL6511XXLT, Service Manual

Page: 28 / 74

29
3-2. Rinsing Cycle
1) Water Supply Cycle
Only cold water is supplied in rinsing cycle.
Only cold water is supplied in rinsing cycle.
In the final rinse, fabric softener is added by opening both the cold water inlet valve V/V, and pre-washing V/V at
and the pre-wash inlet valve V/V at the same time.
2) Refilling Rinse Water
Water level is checked 1 minute after starting the rinse cycle. Water will be added to once again reach the
designated water level.
3) Draining
If the water temperature is 131°F (55°C) or higher, the machine will cool the water by turning on the cold
water valve until the level reaches the high water level before the machine will drain.
When drain cycle begins, the drain pump motor will run continuously.
5) Medium Spin
The medium spin will achieve the rpm selected by the program or options to help remove rinse water
and soap suds.
rum Wa
4) Balance Spin
①
Balancing the laundry : The machine will tumble clockwise and counterclockwise at 45rpm.
During this time, the machine is calculating and trying to correct the level of unbalance in the drum
based on the data from the load on the motor.
②
The machine will try to balance the load 20 times.
Once an appropriate level of balance has been achieved, the machine will advance to the medium spin.