Asko WL6511XXLT, Service Manual

Page: 27 / 74

28
3-1. Washing Cycle
1) Classification of Washing
Pre-wash uses only cold water. It is the default option on the Heavily Soiled program and can be
selected as an option on all cycles except Quick wash and Wool/Handwash.
The main wash cycle time and water consumption for Everyday wear, Towel/Bedding, and Sanitary
programs are set according to the motor load during the load sensing phase. All other programs use
predetermined wash times and water levels based on the pressure sensor.
2) Heater Operation
Once temperature has been satisfied, the hating element won’t cycle back on.
Even if the target water temperature has not been satisfied, the wash cycle will finish according to
the preset wash time.
3) Refilling supply of water
Refilling occurs if the water level drops below the set level within 2 minutes after the initial fill.
The motor stops tumbling during the refilling phase.
During washing, the machine will refill up to 10 times. After the 10th time, the machine will not
add additional water even if water level drops.
The machine will not add water if more than half of washing time has passed or the heating element
has been turned off.
3. Functions per Cycle