EN 23
Installation dimensions
The dimensions and recesses are shown in the illustrations
beneath.
• Cooking hobs can be installed into worktops that are
30 to 50 mm thick.
• The kitchen furniture element underneath the hob should
not be fitted with a drawer. If the kitchen furniture element
as a horizontal panel, it should be installed no less than 60
millimeters from the lower surface of the worktop. The space
between the septum and the hob must be empty; no objects
should be placed into that gap.
• On the furniture back wall there should be a cutout with width
of at least 175 mm along the entire width of the furniture
element.
Mounting the sealing
Remove the protective foil of the sealing strip and attach the
sealing strip around the cut-out in the worktop. Do not attach the
sealing strip through the corner. Instead, cut 4 pieces that fit tightly
together in the corners.
INSTALLATION
490
560
min.50
600
510
50
Summary of Contents for SVK67CS HCI643G
