Asko SVK67CS HCI643G, Operating Instructions Manual

Page: 16 / 32

EN 16
Cooking zone expansion
Activating the cooking zone expansion
• For a selected cooking one (a decimal point is lit next to the
display for the currently selected zone), an additional heating
coil can be activated by pressing the (J) sensor key. The signal
light (E) next to the display will light up.
• Select the cooking zone for both heating coils.
• If a cooking zone also features a third heating coil, this can also
be engaged by pressing the (J) sensor key once again.
Deactivating the additional heating coil
• Select the cooking zone (a decimal point is lit next to the
display for the currently selected zone).
• Additional heating coil may be deactivated by pressing the (J)
sensor key for the selected cooking zone several times.
Operation time limit
For improved safety, your cooking hob is fitted with a device that
limits the duration of the cooking hob operation for each cooking
zone respectively. The duration of operation is measured from
the last change made to the power level settings for a particular
cooking zone. If the power level is not changed for a while, the
cooking zone will automatically be switched off after a certain
period of time which depends on the power level (the higher the
power level, the shorter the duration – see table page 9).
Temporary cooking progress suspension- STOP & GO
The STOP & GO function enables you to temporarily suspend, or
pause the cooking progress (urgent other tasks), while keeping all
the settings.
Engaging the STOP & GO function
• Cooking is temporarily suspended by touching the STOP & GO
(C) sensor key.
• A signal light (C1) will light up above the sensor key.
• All settings are frozen, and the cooking zones do not operate.
The letters S, t, O, and P are indicated alternately on the
display.
OPERATION
J D F
F1
I H G
L K
E