EN 14
Changing the cooking zone power setting
1. Press the cooking zone key of the desired cooking zone.
▷
The dot directly below the corresponding display will light up and is assigned to the
visual slide control.
2. Slide your finger over the slide control to change the power setting.
Please note!
• The appliance is connected to 1 phase. All 4 zones cannot be used at the same time.
The 2 small zones and 1 large zone or the 2 large zones can be used at the same time.
When setting the power level for one of the zones, the system automatically selects the
optimal power distribution. It could be that another zone will be reduced in power or
switched off completely. When this is happening , the display of the related zone will
than flash.
Switching off
Switching off one cooking zone
One cooking zone is switched on. The display shows a power level between 1 and 9, or ‘P’.
1. Press the cooking zone key of the desired cooking zone.
2. Use the slide control to set the cooking zone to ‘0’ (off).
▷
The cooking zone switches off.
▷
The hob switches off after 20 seconds if all cooking zones are set to ‘0’ and no other
process is being used.
Switching off all cooking zones
Several cooking zones are active.
1. Press the On/Off key to switch off all cooking zones.
▷
You will hear a beep. All displays are off. The hob is switched off.
Bridged induction zones
Activating the bridged cooking zone
1. Press the On/Off key.
2. Simultaneously touch the left-hand side or right-hand side cooking zone keys.
▷
The ‘bridged indicator’ will appear on the rear zone display to indicate that the two
cooking zones are bridged.
3. Set the desired cooking power for the bridged cooking zone.
4. To change the bridged zone’s cooking power later on, first press the sensor for the front
cooking zone.
OPERATION