DW70.5
Panel type DW70.5, L = LED, S = Push button,
D = Display
Variant settings
When the main power switch is switched on for
the first time after replacing the control unit, the
variant settings menu is displayed.
1. Press the Program button (S1) until the desired
variant is selected:
The display shows the number 1 and L1
flashes:
Variant 1 = Time saver
The display shows the number and L
flashes:
Variant = with Super rinse
The display shows the number and L
flashes:
Variant = with Tab
The display shows the number and L flashes:
Variant = with Time program
. Confirm your selection by pressing Start (S).
The machine detects the presence of a turbid-
ity sensor, a pressure sensor and a spray arm
diverter. The program returns to the main
menu.
To return to the variant settings menu:
1. Turn off the main power switch (I/0)
. Wait at least 5 seconds
. Press and hold the Program and Start buttons
(S1 and S)
. Switch on the main power switch (I/0)
5. Release the Program and Start buttons (S1 and
S). It takes a few seconds for the machine to
detect that S1 and S are pressed. Proceed
to step within five seconds
. Press Start (S) three times in quick succession.
L1, L, L or L flashes on the display depend-
ing on the previous setting.
7. Use the Program button (S1) to select a vari-
ant
8. Confirm with the Start button (S). The
program automatically returns to the main
menu.
Water hardness setting
Activating the settings menu:
1. Turn off the main power switch (I/0)
. Wait at least 5 seconds
. Press and hold the Start button (S)
. Switch on the main power switch (I/0)
5. Release the Start button (S)
. Use the Program button (S1) to select the
desired water hardness
Setting:
Water hardness [°dH]
Display:
00-5
(also applies to machines without water softener)
The display shows:
1-8
The display shows:
9-11
The display shows:
1-1
The display shows:
15-19
The display shows:
50-
The display shows:
5-9
The display shows:
70-9
The display shows:
80-9
The display shows:
950+
Confirm selection by pressing Start (S). The
program returns to the main menu.
Total reset
To reset the machine to its factory settings.
1. Turn off the main power switch (I/0)
PROGRAMS AND CONTROl UNIT
Summary of Contents for DW70.1
Page 1: ...SERVICE MANUAL DISHWASHERS DW70 1 DW70 3 DW70 4 DW70 5...
Page 2: ......
Page 33: ...33 Article no 80 836 38 rev 01...
