Asko DW70.1, Service Manual

Page: 18 / 33

18
5.5 Program flow description
Presented below is the Quick program. If the component test in the service menu is not sufficient to
identify a fault you can run this program and compare the results with the flow description below. If they
are in agreement this indicates a correctly functioning control unit.
Component Time Comments
Main wash
Drainage pump sec. 5 sec. if the previous program was cancelled
with the Start/Stop button
Inlet valve 0/5 sec. With/without diverter
Circ. pump 0 sec.
Circ. pump & Combi dispenser sec.
Circ. pump 10 sec.
Circ. pump & Element T-0º/5º Eco/Normal temp
Circ. pump 180 sec.
Circ. pump & Element T-0º/0º Eco/Normal temp
SCS sec. Super Clean System
Drainage pump 5 sec.
1st rinse
Inlet valve 7 sec.
Circ. pump sec.
Pause 5 sec.
Circ. pump sec.
Drainage pump sec.
Inlet valve 0/5 sec. With/without diverter
Circ. pump 90 sec.
SCS sec. Super Clean System
Drainage pump 5 sec.
Final rinse
Inlet valve 0/5 sec. With/without diverter
Circ. pump & Element T-0/0º Eco/Normal drying
Circ. pump & Combi dispenser sec. None Eco drying
Circ. pump sec. No Eco drying
Circ. pump & Combi dispenser 0 sec. No Eco drying
Circ. pump 90/0 sec. Eco/Normal drying
Pause 0 sec.
Drainage pump 5 sec.
Fan 00 sec. Normal drying
PROGRAMS AND CONTROl UNIT