Asko DW70.1, Service Manual

Page: 20 / 33

0
DW70.3
Panel type DW70., L = LED, S = Push button,
Variant settings
When the power is switched on for the first time
after replacing the control unit, the variant settings
menu is displayed.
1. Press the Program button (S1) until the desired
variant is selected:
l1 flashes:
Variant1 = Time saver
l2 flashes:
Variant = Super rinse option
l3 flashes:
Variant = Tab
. Confirm your selection by pressing Start (S).
The machine detects the presence of a turbid-
ity sensor, a pressure sensor and a spray arm di-
verter. The program returns to the main menu.
To return to the variant settings menu:
1. Turn off the main power switch (I/0)
. Wait at least 5 seconds
. Press and hold the Program and Start buttons
(S1 and S)
. Switch on the main power switch (I/0)
5. Release the Program and Start buttons (S1 and
S). Proceed to step within five sec-
onds.
. Press Start (S) three times in quick succession.
L1, L or L flashes according to the previously
selected variant setting
7. Use the Program button (S1) to select a variant
8. Confirm your selection by pressing Start (S).
The program returns to the main menu.
Water hardness setting
Activating the settings menu:
1. Turn off the main power switch (I/0)
. Wait at least 5 seconds
. Press and hold the Start button (S)
. Switch on the main power switch (I/0)
5. Release the Start button (S)
. Use the Program button (S1) to select the de-
sired water hardness.
Setting: Water hardness [°dh]
All LEDs unlit0-5
(also applies to machines without water softener)
L1 lit -8
L1- lit 9-1
L1- lit 15-19
L1- lit 0-9
L1-5 lit 0-
L1- lit 5+
7 Confirm your selection by pressing Start (S).
The program returns to the main menu.
Activating of Super rinse (Variant 1 and 3; S7)
Activating the settings menu:
1. Turn off the main power switch (I/0)
. Wait at least 5 seconds
. Press and hold the button (S7)
. Switch on the main power switch (I/0)
5. Release the button (S7)
. Use the Program button (S1) to select the de-
sired status
L1 unlit: Super rinse deactivated
L1 lit: Super rinse activated
7. Confirm your selection by pressing Start (S).
The program returns to the main menu.
S1
L1 L2 L3 L4 L5 L6
S3
S4 S5 S6 S7
S2
L7
L8
L12
L13
L14
L16 L15 L17
L10
L11
IR
PROGRAMS AND CONTROl UNIT