EN 26
Connecting the Bridge induction cooking zones
Two Bridge induction cooking zones can be connected to each other. This creates one large
zone that can be used, for example, with a grill plate or a large fish pan on the same power.
The pan must be large enough to cover the centres of the front and rear bridge induction
cooking zone.
• Maximum pan size: 40 x 25 cm. For even heat distribution, we recommend using a heavy-
bottom baking dish or pan. During cooking, the dish or pan will heat up.
Be careful to prevent burns.
• When placing the baking dish on the hob, make sure it does not cover the control panel.
Connection of bridge induction cooking zones
1. Press the On/Off key to switch On the induction hob.
2. Simultaneously touch and hold the two left Bridge induction zone selection keys for approx.
3 seconds pressed.
▷
The rear cooking zone display shows a connection symbol to indicate that the two
cooking zones are connected.
3. Set the desired cooking power for the connected cooking zones using the - or + keys.
▷
To change the connected zones cooking power later, select the front cooking zone and
use the - or + key to set the power level.
Connected zones cannot be set to the power boost setting P.
Maximum available power level is setting 9.
Disconnection of bridge induction cooking zones
1. Set the power level of the connected induction zones to zero ‘0’.
▷
The connection symbol will disappear on the rear cooking zone display.
▷
Both cooking zones can be used independently.
OPERATION
