EN 20
Following a power failure the additional function settings will only be saved for a
few minutes. All settings, except the sound signal and child lock, will then revert to
factory settings.
Display lightning
Display lighting can be switched Off if it is not used.
1. Press the ‘child lock key’ + ‘timer key’ and hold it for 5 seconds to switch Off the display.
If a timer function has been activated, then “OFF” and the ‘TIMER’ icon will appear on the
display to remind you of the activated function.
2. Press the ‘child lock key’ + ‘timer key’ and hold it for 5 seconds to switch On the display
again.
Meat probe
If the meat probe is plugged in, the meat probe screen will be shown and a small meat probe
icon will appear next to the time. The oven operates until the food core reaches the set
temperature. The core temperature is measured by means of the temperature probe.
1. Screw the metal cover from the connection point (front top corner of the left side wall).
2. Put the meat probe plug in the connection and insert the meat probe completely into the food.
▷
The display will show the meat probe screen and icon.
3. Set the function and temperature. Instead of the time, you need to set the core temperature
(between 30 -100 °C). Press the ‘timer key’ twice and select a core temperature with the
‘settings knob’.
0
0
0
OPERATION
789046_en_naslovnica_drug_papir.indd 20
789046_en_naslovnica_drug_papir.indd 20
8. 11. 2021 14:59:09
8. 11. 2021 14:59:09
