10
11
STEP 2. ATTACHING THE ACCESSORY DOOR OR CUSTOM PANEL
Follow the separate instructions supplied with the
dishwasher to attach the chosen accessory door
or custom panel to the front of the machine.
NOTE:
Once you have fitted the accessory door or
custom panel to the dishwasher, the door springs
may need adjusting. Check that the door stays
in the position in which it is placed. If the door
drops down when you open it, the springs need
to be tightened. If the door shuts on its own, the
springs need to be loosened. See step 3 for further
instructions.
NOTE:
The custom panel must not cover the air nozzle
and thereby block the flow of air.
Typical panel dimensions are based on a
23
5
/
8
” (600 mm) opening width and 34 ½” (876 mm)
finished height, with a minimum 4” (102 mm) toe
kick and
1
/
8
” (3 mm) reveals. For all other opening
widths, the panel should be ¼” (6 mm ) less than
the opening to achieve minimum reveals. Panel
dimensions must be adjusted accordingly for all
other installations.
Custom Panel Dimensions
Width
Height
Custom panel XL (4” toe kick)
23
3
/
8
” (600 mm)
28-1/8” (714 mm)
Custom panel XXL (4” toe kick) 23
3
/
8
” (600 mm)
30-1/8” (765 mm)
Custom panel XXL (6” toe kick) 23
3
/
8
” (600 mm)
28-1/8” (714 mm)
Panel Requirements
Max. Weight (including handle) 20 lb (9 kg)
Min. Thickness
3/4” (19mm)
2x
1"
(25 mm)
2x
3/8"
(10 mm)
6x
1-1/2"
(38 mm)
2x
1
3
4
6
5
2
*
*
7
*
8
*
CUSTOMER CARE CENTER 1-800-898-1879
• WWW.ASKONA.COM
CUSTOMER CARE CENTER 1-800-898-1879
• WWW.ASKONA.COM
492181 Install DW16 FI USA EN Rev 03.indd 10
2016-05-31 10:32:47
