Asko ADA Series, Installation Instructions Manual

Page: 4 / 20

4 5
XXL DISHWASHERS
UNIT DIMENSIONS
U.S. Metric
Height (Adjustable) 33-7/8˝ to 35-7/8˝ 861 mm to 912 mm
Width 23-5/8˝ 596 mm
Depth (Includes high loop) 22-7/8˝ 581 mm
Depth W/Door Open 49-1/2˝ 1258 mm
Weight 110 Ib 50 kg
Technical Data
Electricity 120V, 60Hz, 15 amp
Water pressure 4.2 - 140 psi,
0.03-1.0 MPa,
0.3-10 Bar
Heating element 1200 watt
Max loading 1300 watt
33-7/8" to 35-7/8" 861 mm to 912 mm
49-1/2"
1258 mm
5-3/8" to 7-3/8" 133 mm to 183 mm
23-5/8"
596 mm
22-7/8"
581 mm
3-1/8"
79 mm
Door
2-7/8"
74 mm
3-3/8"
85 mm
9"
228 mm
The best place for your dishwasher is in the kitchen near
the sink. This makes it easier to connect the water and
drain supply lines.
A built-in dishwasher must be enclosed on the top, both
sides and the back.
The power-supply receptacle for the appliance shall
be installed in a cabinet or on a wall adjacent to the
undercounter space in whitch the appliance is to be
installed.
The electrical and water supplies should enter through
the area indicated by the shading on the illustration at
right. Preferably, they should come through the right side
of the machine. The access hole must be round and
smooth and no bigger than 1-1/2˝ (38 mm) in diameter. If
the partition is metal, it needs to be covered with an edge
protector. Use caution when the appliance is installed
or removed, to reduce the likelihood of damage to the
power-supply cord.
Cutout Dimensions
U.S. Metric
Height** 33-7/8˝ – 36˝ 860 – 914 mm
Width 23-5/8 – 24˝ 600 – 610 mm
Depth 24˝ 610 mm
** If accessory FI fill strips are used, then 1/2˝ (13 mm) must
be added to the dishwasher height and cutout. Additionally,
3/8˝ (10 mm) must be added to the dishwasher width and
cutout width. Remove locking nuts for an installed height
of 33-7/8˝ (860-861 mm).
23-5/8" – 24"
600 – 610 mm
24"
610 mm
4"
102 mm
5-3/8"
136 mm
**33-7/8"
–
36" minimum
**860
–
914 mm
2"
51 mm
PREPARING THE LOCATION
3 ½” (89)
W
3
/
4
”
(19)
3 ½” (89)
W
Framed cabinets will require additional finished filler material
behind the face frame for a proper installation.
Reverse hose within the high loop
bracket to accommodate a left side drain.
FINISHED
RETURN
FINISHED
RETURN
FRAMELESS CABINETRY FRAMED CABINETRY
TYPICAL
FILLER
CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM
492181 Install DW16 FI USA EN Rev 03.indd 4 2016-05-31 10:32:40