Access Point Configuration
4-10
Finally, the “Info” menu contains “Wireless and Ethernet Statistics”.
4.1.3 How to Uninstall the
SNMP Manager
In order to uninstall SNMP Manager you must go to the ‘Control Panel” (“Start-
>Settings->Control Panel”) and press the “Add/Remove Programs” button. Select the
application from the list and press the “Add/Remove...” button. Press “Yes” when asked
whether you want to remove this program and its components. A window indicating the
uninstallation progress appears.
4.2 Using the USB
Port
Note: This procedure requires the use of the DFU Configuration Utility which can be
used only through the USB port. When you connect the card to the USB port for
the very first time, the operating system will ask for the driver for the card.
Please locate the driver into your CD. At this time, only a driver for MS Windows
98 is available. After you have completed the installation of the driver, you can
use the DFU Configuration Utility.
In order to configure the AP through the USB port, you must use the DFU Con-
figuration Utility.
In order to change or view the Bridge parameters you have to plug the USB cable and
then open the DFU.exe application which you will find into the “Utilities” folder of your
CD.
By pressing the “Configuration” button in the main dialog box (Figure 4-11) the Bridge
Configuration dialog appears (Figure 4-12).
Figure 4-11. DFU Configuration Utility
Summary of Contents for RTW020
