ASKAYNAK CleanArc M100, User Manual

Page: 36 / 60

34
COMPLIANCE WITH EU DIRECTIVES :
Kaynak Tekniği Sanayi ve Ticaret A.Ş., declares that CleanArc
®
M100 Mobile Fume
Extraction Unit to which this declaration relates, is in conformity with the following
directives.
2006/42/EC Machinery Directive
2006/95/EC LVD Directive
2004/108/EC EMC Directive
TS EN ISO 15012 Health-Safety in welding and allied processes
Table A1
INTENDED USE:
Mobile filter unit is solely designed for purifying the dust - contaminated air resulted
during welding. The properties of the substances and particles that are to be
collected can vary depending on the applications. The application ranges of mobile
filter unit is as follows:
Properties of the Particles to be filtered Compliance
Dry Dust, Solid Particles YES
Combustible or Explosive Dry Dust and Solid Particles
(Aluminum or other light metals, buffing or sanding dust, wood)
NO
Gas, Vapor, Liquid or gases with liquid mist and droplets NO
Oily, Moist, Hygroscopic or Chemically aggressive dust and Particles NO
Table A2
DO NOT PERMIT cigarettes, sparks or any other burning materials entering Industrial
Filter Unit air suction line. This could results fire or explosion hazard inside filter
cabin.
Mobile Filter Unit has been exclusively designed and produced for conditions as
defined in your contractual agreement. It is
STRICTLY PROHIBITED to use same
filter unit for different type of dust and emissions. Intended use includes that the
installation of the system and its operation must always be in accordance with this
operating manual.
Introduction - 1
US
E
R
G
UI
D
E