aks-S4
Figure 20
Figure 22
1 2 3 4
H
Z
Figure 21
H
Z
Figure 19
Page 12
z4200064_GA_Bett_S4_151015_EN
Push the controller onto the back part drive and secure it against slipping sideways using the
13.
fixing screw (Figure 19).
Press the strain relief of the power cable into the holder on the head side (Figure 20).
14.
Connect the manual control unit to the controller and install the strain relief (Figure 21).
15.
Now connect the plug connections for the drives according to Figure 22.
16.
H =
connection for manual control unit
1 =
connection for back part drive
2 =
connection for thigh part drive
3 =
connection for height adjustment drive in the scissor lift
4 =
blank plugs
Z =
strain relief for manual control cable
Note: Strictly ensure the cable of the manual control unit is fastened to the strain relief Z,
otherwise cable breaks can occur at the plug connection.
