8
(1) Network port
Used to connect the network cable.
( 2) CONTROL
When using RS232 to control the projector,
please connect the serial control line to this
terminal.
(2) COMPUTER IN2/MONITOR OUT
- Used to connect the computer output.
- Used to output the analog signals from (3) or
(6) to the other monitor.
(3) COMPUTER IN1/SCART IN
- Used to connect a computer or RGB SCART
output.
(5) HDMI
Used to connect the HDMI digital output.
(4) DVI
Used to connect the DVI digital output.
(6) BNC jacks
C
Cr
onnect the component video output to Y, Cb
or composite video output from video
equipment to VIDEO 2 terminal, or connect
the RGBHV format (5 line system) signal
to G, B, R, Hs, and Vs jacks.
(7) S-VIDEO
Used to connect the S-video output of video
equipment.
(8) Composite (video) input jacks
Connect the composite signals to this
terminal.
(9) AUDIO IN3
Connect the audio to these jacks, When Video
equipment connected to INput3.
Connect the audio to this jack (stereo), When Video
equipment connented to INPUT2.
(10) AUDIO IN2
(1
1
1) AUDIO OUT
Used to output the audio from (9) or (10).
Part names and functions
Rear terminal
1
2
3
4
5
12
11
7
6
9
8
10
