48
KH
H
MENU
SELECT
z
z
1080i
A
Information
Displaying input source
The information menu is used to detect signal of projected image and running state
Operation through menu
Press
▲▼
to select the information. And the information menu will appear.
You can then see the information displayed as follows:
Information
Input
H-sync freq.
V-sync freq.
Screen
Language
Lamp status
Power management
Key lock
Back
Exit
Move
Component
Normal
English
10 H
Off
1 min
Lamp counter
H-sync freq .
V-sync freq .
Lamp counter
The horizontal frequency of the input signal is displayed in
KHz, or - - - -KHz when no signal.
The vertical frequency of the input signal is displayed in Hz,
or - - - - Hz when no signal. Numbers of Hz doubles when
during Interlace.
The cumulative lamp operating time is displayed.
Press menu on the Top Control and then press SELECT
button to display on screen menu. Press the Point
▲▼
buttons to select the Information. The Information Menu is
displayed.
See below for displayed information.
Menu Operation
Input
Language
The selected input source is displayed.
The selected language is displayed.
Key lock
Display Off, Remote Control or the Projector.
Power management
Screen
The selected screen size is displayed.
Lamp status
The selected lamp mode is displayed.
Off, Ready or Shut down is displayed.
