Asist LM030 Instructions For Use Manual Download Page 32

LM030 - Laser measuring instrument 30m

EN

32

1.  Working Environment

a) Keep the working area clean and well-illuminated. Mess and dark 

spaces in the working area are the most common cause for injuries. 

Please store the tools properly when not in use.

b) Do not use the power tool in the environment with the risk of fire 

or explosion, i.e. in areas where flammable liquids, gases or dust are 

present. Sparks are formed on the commutator of the power tool and 

may cause ignition of dust or vapours.

c)  When using power tools, prevent access of unauthorized persons, 

in  particular  children,  to  the  workspace!  If  distracted,  you  can  lose 

control of activities performed. Never leave power tools unattended. 

Prevent access of pets/animals to the equipment.

2.  Electrical Safety

a) The power cable plug of the power tool must match the wall sock

-

et. Never alter the plug in any way. Never use two-way adaptors or 

any other adaptors with the tools having a protective pin in the power 

cable plug. Undamaged plugs and matching sockets reduce the risk 

of electric shock. Damaged and tangled power cables increase the 

risk of electric shock. Should the power cable be damaged, it must be 

replaced by a new power cable that may be acquired in our author

-

ized service centre or from the importer.

b) Avoid body contact with grounded objects, i.e. piping,

central heating radiators, cookers and refrigerators. Risk of electric 

shock is increased when your body touches the ground.

c)  Do not expose the power tool to rain, humidity or other wet condi

-

tions. Never touch the power tool with wet hands. Never wash the 

power tool under running water. Never immerse it in water.

d) Do not use the power cable for any purpose other than for which it 

is intended. Never carry or pull the power tool by its power cable. Do 

not pull the plug from the socket by cable pulling. Prevent mechanical 

damages to the electric cables by sharp or hot objects.

e) The power tool has been manufactured for powering by the alter

-

nating current. Always check the compliance of the voltage with the 

rated voltage stated on the nameplate.

f)  Never use the power tool with a damaged cable or plug, or which 

fell to the ground and is damaged in any way.

g) Should you use an extension cable, always check the compliance 

of its technical parameters  with specifications  stated on the name

-

plate. If the power tool is used outdoors, use an extension cable suit

-

able for outdoor use. When using extension drums, these must be 

unwound to prevent cable overheating.

h) Should the power tool be used in damp areas or outdoors, it may 

be used only if connected to an electric circuit with a circuit breaker 

≤30 mA. Use of electric circuits with an RCD device reduces the risk 

of electric shock.

i)  Hold the hand power tool only by insulated surfaces intended for 

gripping since the cutting or the welding equipment may touch a hid

-

den wire or the power cable of the tool during operation.

3.  Personal Safety

a) When using the power tool, be attentive and vigilant, pay maxi

-

mum attention to the activity you are doing. Focus on work. Do not 

use the power tool when tired or under the influence of drugs, alco

-

hol or medication. Even a moment of inattention when using a power 

tool may result in a serious personal injury. When working with power 

tools, do not drink, eat or smoke.

b) Use protective equipment. Always wear eye protection. Use pro

-

tective equipment corresponding with the type of work you are doing.   

Protective  equipment,  e.g.  a  respirator,  safety  slip-resistant  shoes, 

headwear or hearing protection in accordance with conditions of work 

reduce the risk of personal injury.

c)  Avoid accidental power tool activation. Do not carry power tools 

connected to the mains with your finger on the trigger or the switch 

button. Before connecting to the mains, check that the switch or the 

trigger is in the “off” position. Carrying of power tools with your finger 

on  the  switch  or  inserting  the  power  tool  plug  into  a  socket  with  a 

switch being “on” may result in serious injuries.

d) Before switching the power tool, remove all adjustment wrenches 

and  other  tools.  The  adjustment  wrench  or  a  tool  that  remains  at

-

tached to the rotating part of the power tool may result in injuries of 

bystanding people.

e) Always keep stable position and balance. Work only on areas that 

you can safely reach. Never overestimate your own strength. Do not 

use power tools when tired.

f)  Dress  appropriately.  Wear  working  clothes.  Do  not  wear  loose-

fitting clothes or jewellery. Be careful not to allow your hair, clothes, 

gloves or other parts of your body to get too close to the rotating or 

hot parts of the power tool.

g) Connect an equipment for dust extraction. If the power tool may be 

connected to an equipment for capturing or extraction of dust, make 

sure

to connect the aforesaid equipment and use it properly. Use of such 

equipment may reduce the dust-related risks.

h) Fasten the workpiece firmly. Use a carpentry clamp or a vice to 

fasten a part intended for machining.

i)  Dot not use the power tool, if you are under the influence of alco

-

hol, drugs, medication or other intoxicating or addictive substances.

j)  This equipment is not designed for use by persons (including chil

-

dren)  with  reduced  physical,  sensory  or  mental  capabilities  or  lack 

of experience and knowledge, unless they are under supervision or 

have been instructed with regard to use of the equipment by a person 

responsible for their safety. Children must be supervised to be sure 

that they do not play with the equipment.

4.  Use and Maintenance of the Power Tool

a) Always disconnect the power tool from the mains in case of any 

trouble during work, before each cleaning or maintenance, for each 

relocation and after work. Never use the power tool if it is damaged.

b) Should the power tool start to emit an abnormal noise or odour, 

stop the work immediately.

c)  Do not overload the power tool.  The power tool works better and 

safer if operated in specified rpms. Use the right power tool designed 

for your activity. The right power tool works better and safer if being 

used for work for which it has been designed.

d) Do  not  use  power  tools  that  cannot  be  safely  switched  on  and 

switched  off  by  the  switch  button.  Use  of  such  tools  is  dangerous. 

Defect switches must be repaired in an authorized service centre.

e) Disconnect the power tool from the power source before your start 

its  adjustment,  exchange  of  accessories  or  maintenance.  This  will 

prevent the risk of accidental starting.

f)  Power tools not being used must be kept stored away from chil

-

dren  and  unauthorized  persons.  Power  tools  in  hands  of  inexperi

-

enced users may be dangerous. Store the power tools in a dry and 

safe place.

g) Keep the power tool in good conditions. Check the adjustment of 

moving parts and their looseness regularly. Check for possible dam

-

ages of protective covers or any other parts that may endanger the 

safe operation of power tools. If the power tool is damaged, ensure 

its proper repair before its further use. Many injuries are caused by 

poorly maintained power tools.

h) Cutting tools must always be sharp and clean. Properly maintained 

and sharpened tools facilitate work, reduce the risk of injury and work 

with such equipment is controlled much easier. Use of other acces

-

sories than specified in the manual may result in damages to the tools 

and personal injuries.

i)  Use power tools, accessories, other tools, etc. in accordance with 

these instructions and in a manner that is determined for a particular 

power tool and with regard to the working conditions and the type of 

work. Use of the tools for purposes other than specified may result in 

dangerous situations.

5.  Use of Battery-Driven Power Tools

a) Before inserting the battery, make sure the switch is in “0-OFF” 

position. Battery insertion into a tool that is switched on may result in 

dangerous situations.

b) To  charge  the  batteries,  always  use  chargers  specified  by  the 

manufacturer. Use of chargers determined for other battery types may 

result in damaging and cause a fire.

c)  Use batteries determined for the particular power tool only. Use of 

other battery types may result in personal injuries or cause a fire.

d) If not being used, store the battery separately from metal objects, 

e.g.  clamps,  wrenches,  screws  and  other  small  metal  objects  that 

could cause connection of one battery terminal with another. Battery 

short-circuiting may cause injuries, burns or cause a fire.

e) Handle the batteries with care. Rough handling may result in leak

-

age of chemicals from the battery. Avoid contact with such substanc

-

es. If you still come into contact with them, wash the affected area 

with  running  water.  If  the  chemical  substance  gets  into  eyes,  seek 

medical  advice  immediately.  Battery  chemicals  may  cause  serious 

injuries.

6.  Service

a) Do not exchange any parts of the power tool, do not repair it or do 

not otherwise temper the power tool structure. Repairs of the power 

tool must be carried out by qualified persons.

b) Any repair or modification of the product without authorization by 

our company is forbidden (may result in injuries or damages).

c)  Power tools must always be repaired in an authorized service cen

-

tre. Use only original or recommended spare parts. This will help you 

to ensure your safety and safety of your power tool.

GENERAL SAFETY INSTRUCTIONS

Please read, remember and keep these safety instructions for future reference

WARNING: When using electric machines and power tools, always comply with the following safety instructions to protect against an electric shock, 

personal injury or the risk of fire. Within the meaning of these instructions, the expression “power tool” means both power tools powered from the 

mains (power cable) and power tools powered from batteries (no power cable).
Keep all warnings and instructions for future use.

Summary of Contents for LM030




























































Reviews: