ADDITIONAL SAFETY INSTRUCTIONS
Please read these safety instructions before use and
keep them in a safe place.
! - This symbol indicates the risk of injury or damage
to the device.
Wear safety goggles, hearing protection, dust mask
and gloves.
• When working in a dusty environment, provide free
ventilation openings. Unplug the power supply before
cleaning
device.
• Caution, risk of injury! The grinding wheel still runs
for some time after the machine is switched off.
• Never cover the warning labels on electrical equi
-
pment.
• Mount the electrical equipment on a solid, level and
horizontal surface. If electrical equipment
slip or sway, the tool cannot be guided evenly or
safely.
• Only approach the tool to the workpiece when it
is switched on. Otherwise there is a risk of the tool
getting stuck in the workpiece
and pulls the workpiece with it. This can lead to injury.
If the tool locks, turn off the power tool immediately.
• Set the correct speed before starting work.
• Do not touch the grinding wheel before it has cooled
down before finishing work. The tool does
the work heats up a lot.
• Store unused power tool in a safe place.
• Never leave the tool until it has come to a complete
stop. Retractable tools can cause injuries.
• Never use a power tool
if the cable is damaged.
• Do not operate the device in an abnormal body posi
-
tion. Always maintain a safe posture and maintain
always balance.
• Water must be kept at a safe distance out of the
reach of electrical parts of tools and people in the
work area.
• Attention! It never removes loose chips, splinters or
stuck wooden parts while running
grinding wheel. Switch off the appliance when trouble
-
shooting or jammed pieces of wood.
Watch out for:
Damage to the lungs if you do not wear suitable respi
-
ratory protection.
Hearing damage if you do not wear suitable hearing
protection.
Personal injury if you touch the abrasive tools on
uncovered places; ejection of parts from workpieces
or damaged grinding wheels.
Damage to health resulting from hand-arm vibration
if the device is used for a long time or is not properly
guided and maintained.
This power tool generates an electromagnetic field
during operation. This field may restrict active or
passive medical implants in certain circumstances.
To reduce the risk of serious or fatal injuries, we
recommend people with medical implants
Consult your doctor and manufacturer before opera
-
ting the machine.
Prior to the first operation, carry out a test run of at
least one minute without load and at maximum speed.
Do not stand in the danger area.
- Use protective equipment against noise, dust and
vibration !!!
SAVE THESE SAFETY INSTRUCTIONS !!!
DESCRIPTION (A)
The disc grinder is suitable for grinding hard and soft
wood.
1 Grinding wheel
2 Speed controller
3 On / Off switch
4 Mounting for screw clamp
5 Mains plug
6 Angular scale
7 Angle locking screw
8 Washer
9 Screw for fixing to the grinding table
10 Grinding table holder
11 Sanding table
12 Groove for angle stop
13 Angle stop
14 Angled adapter for external dust extraction
15 Adapter for external dust extraction
16 Screw clamp
17 Hex key
18 Sandpaper
19 Angle stop rails
20 Angle stop screw
Pictograms
Pictograms on the product packaging:
a) Power supply values
b) Power consumption
c) Idle speed
d) Grinding wheel diameter
e) Table angle
USE AND OPERATION
ASIST tools are intended for home or hobby use only.
The manufacturer and importer do not recommend
using this tool in extreme conditions and under high
loads.
Any additional requirements must be the subject of
an agreement between the manufacturer and the
customer.
Fastening
Attach the disc grinder horizontally or vertically to the
worktop or table.
The supplied screw clamp (16) must engage in one of
35
Summary of Contents for AE3KT14
Page 4: ...4...
Page 61: ...www rs we com...