22
・
When the chronograph is reset,
“
PACE
”
and
“
L/M
”
(Lap Memory: number of measurement data
stored in memory) are shown alternately in the
lower row of the display.
・
The number of measurement data in memory accumulates each time
running data measurement is made.
・
Up to 300 measurement data can be stored in memory.
Instruction Manual
AP01 : WJ32
When the PACE_CHR mode appears, PACE_CHR is shown in the lower
row of the display for 1 second before the chronograph display is shown.
* For the distinction among the displays when the chronograph is reset, measuring and stopped,
see P. 26.
●
Selection of measurement display
Note that the measurement display cannot be changed during measurement.
How to check the Shoes Impact Meter
* Press button
“
E
”
to return to the PACE_CHR mode.
* Selection of the shoes (SH1 or SH2) can be made by pressing button
“
D
”
.
The Shoes Impact Meter for the selected shoes will be shown thereafter.
Checking the memory capacity
詳しい説明は、
28
ページに記載してあります
Number of laps
in memory
Button
“
B
”
: Mode
change
Button
“
D
”
:
Selection of measurement display
Button
“
E
”
: Lap/reset
Shoes Impact Meter
Button
“
A
”
: Start/stop
PACE_CHR mode
Shoes Impact Meter
Ⓓ
Ⓔ
Ⓔ
Ⓔ
Ⓔ
Distance run
Split time
PACE
PACE
Distance run
PACE
Lap time
Split time
Current time
Lap time
Distance run
Current time
Button
“
C
”
: Lighting up
backlight
How to Use PACE Function
PACE_CHR (Chronograph) Mode (Preparation Before starting Running)
Ⓓ
Ⓓ
Ⓓ
●
Ⓓ
* For more detailed information on the Shoes Impact Meter, see P. 28.
