20
Instruction Manual
AP01 : WJ32
How to Use SPM Function
STEPS Mode
* When no number of steps data is stored in memory:
The total number of steps taken during a run are accumulated, and stored in memo-
ry on a monthly basis. Up to 12 months of such data is stored, and can be recalled
month by month in order starting from the data of the current month.
Number of step data
of the current month
Number of steps data
of the previous month
Number of steps data
of 11 months ago
Ⓔ
Ⓔ
Number of
steps data
Confirmation of whether or not the
selected data should be deleted
The entire number
of steps data has
been deleted.
B
B
Press for
more than
2 seconds.
Keep the button
pressed for 2 more
seconds or longer.
Beep,
beep,
beep
Confirmation
beep
Release the button.
* The data has not been deleted yet.
* The number of steps data cannot be deleted month by month.
* Before deleting the number of steps data, check that the chronograph is reset.
* Deletion of the number of steps data will not affect the other data in memory such as the data
recorded in the SPM_LOG, PACE_LOG and DISTANCE modes, which remains undeleted.
When the STEPS mode appears, STEPS is shown in the lower row of the display for
1 second before the number of steps is shown.
Number of steps (The display indicates 263,658 steps.)
Month
Button
“
E
”
: Selection of monthly data
Year
Measurement
month
Measurement year
Button
“
B
”
: Mode change
Button
“
C
”
: Lighting up
backlight
Button
“
B
”
(pressed for more
than 2 seconds): Deletion of data
Number of steps data
Ⓔ
Deletion of number of steps data
