ALPACO ELEGANCE INSTALLATION
Page 2
STEP 1:
FIGURE 1
LAYOUT
A. Before proceeding, confirm that the
backings of the walls and floor are
adequate to support the secure mounting
of the ALPACO Elegance units.
B. Review the layout drawings and package
lists that have accompanied this order.
C. Establish and mark panel center lines for
wall brackets.
D. Mark wall bracket holes using the brackets
as templates. The bottom of the bracket
should sit at 6 ¼” (or 9 ¼” if required)
above the floor.
E. If installing an alcove, please see page 7 for
details.
STEP 2:
FIGURE 2
WALL BRACKETS
A. Drill 1/4” diameter x 2.5” deep holes for
the red plastic shields provided using a
1/4” drill bit. However, as site conditions
vary, an assortment of bit sizes is
recommended.
B. Insert the anchoring devices into the walls
and secure the wall brackets.
Panel Center Line
Wall Pilaster
Center Line
Wall Bracket
160 Tower Drive
, Burr Ridge,
IL 6052
7
Phone: (708) 442-6800 Fax: (708) 442-7439
www.asi-accuratepartitions.com
