Ashton Bentley Boardroom one70, User And Installation Manual

Page: 22 / 86

www.ashtonbentley.com
Doc No:ABC-506-040738-9929 Rev1
Ensure Wall Par on(s) is suitably secure
enough to support the brackets and that all
materials are suitable prior to star ng the
installa on process.
Wall fi xing kit (supplied in pairs)
ABC-506-027694-9453
3.1.A - Wall Fixing Prepara on and Safety
When the slim base is installed then for addi onal stability and security a wall fi xing kit is supplied which
tethers the system to a wall/par on. A comprehensive installa on instruc on for the wall fi xing kit
(shown right) is available. Please refer to doc: ABC-506-040738-4290
Before beginning the installa on process it is important to check that the designated area is suitable for
the system. If you have any doubts please contact your retailer/supplier who will be able to answer any
ques ons you may have.
A minimum of two persons are required
for certain tasks so ensure that suitable
help is provided. Do NOT a empt to move
equipment alone or unsupervised.
Ensure all personal protec ve equipment
required for ins lla on is used and opera on
instruc ons are followed.
3.1.B - Bracket adjustment
Each bracket is formed of two pieces - simply place the
“L” shape bracket into the wall fi xing plate as shown. The
bracket is designed to off er an element of adjustment so
it is important not to over ghten the AB Knobs at this
stage un l system has been located in its fi nal posi on as
some further adjustments may be required.
Ensure loca on is suitable for brackets
before beginning installa on process.
Before beginning the installa on process it is important to check that the designated area is
suitable for the system. If you have any doubts please contact your retailer / supplier who will
be able to answer any ques ons you may have.