Ashton Bentley Boardroom one70, User And Installation Manual

Page: 11 / 86

VI
Ashton Bentley Boardroom one70 User and Installa on Manual
System Loca on
Before assembly, decide on the loca on where the system is to be placed. Power and data cables plug into
the back of the unit. The interface-s
TM connects to the abox TM (inside the chassis) by a single cable (provided)
that can be run from the base of the chassis to a mee ng room table.
Cables should not be le loose across a fl oor. Always secure cables to the fl oor using an
appropriate cable containment system or run below raised fl ooring.
AC Power
A single 100-230V mains supply is required to power the system.
Networking
The Boardroom two70 requires one network connec on through the back of the chassis to the abox
TM
.
Handling and Access
Be sure to follow all manual handling and health and safety guidelines when moving or assembling
equipment.
More informa on regarding the placement and installa on of an Ashton Bentley system
can be found in sec on 2 of this user manual.
More informa on regarding the assembly and manual handling of an Ashton Bentley
system can be found in sec on 3 of this user manual.
The 3 Metre Mains IEC cable (supplied)
has an integral locking security latch which
ensures a posi ve fi t to the system.
The 3 Metre Network cable (supplied) has an
integral locking security latch which ensures
a posi ve fi t to the system.
Regional power leads can be ordered and
supplied with system per user specifi ca on.