2
© 2021 United States Stove Company
This manual describes the installation and operation of the Ashley, AP5000 wood heater. This heater meets
the 2020 U.S. Environmental protection agency’s crib wood emission limits for wood heaters sold after may
15, 2020. Under specific test conditions this heater has been shown to deliver heat at rates ranging from
8,141 to 12,161 btu/hr output.
Heating Specifications
Heating Capacity
500 - 1,000 sq. ft.
*Pellet size may effect the actual rate of fuel feed and
burn times. Fuel feed rates may vary by as much as 20%.
Use PFI listed fuel for best results.
Fuel Burn Rate
3/4 - 2 1/2 lbs./hr.
Burn Time (lowest setting)
35 hours
Hopper Capacity
28 lbs
Electrical Specifications
Electrical Rating
110-120 volt, 60Hz, 3.0 Amp
Watts (operational)
175 approximately
Watts (igniter running)
425 approximately
Dimensions
Height X Width X Depth
27” [685.7 mm] X 36” [914.4 mm] X 12.43” [315.77 mm]
Depth with Mounting Wall
Bracket
Approx. 14.27” [362.4 mm]
For Customer Service, please call:
1-800-750-2723 Ext 5050 or;
Text to 423-301-5624 or;
Email us at:
[email protected]
Note:
Register your product online at
www.usstove.com
or download the
free app today. This app is available only
on the App Store for iPhone and iPad.
Search US Stove. Save your receipt with
your records for any claims.
WARNING:
IT IS AGAINST FEDERAL REGULATIONS TO OPERATE THIS WOOD HEATER IN A MANNER
INCONSISTENT WITH THE OPERATING INSTRUCTIONS IN THE OWNER’S MANUAL.
INTRODUCTION
